The Permit and Inspection Journey in Toronto – Step by Step

Thinking about a home addition, new garage, or maybe a garden suite in Toronto? Before the hammer swings and the concrete pours, every project has to follow the city’s permit and inspection process. It might sound a little intimidating, but when you break it down, it’s really just a few key stages.

Stage 1: Dig First, Inspect Later

Once the ground is opened up and the site is ready, the very first inspection takes place. This is before you pour any concrete. The inspector checks that the excavation and foundation work are safe and built to code. Think of it as giving your project a solid thumbs up before the concrete locks it all in.

Stage 2: Framing, Wires, and Pipes

Next comes the framing inspection. But it’s not just about the walls going up — this stage also covers mechanical systems, electrical, plumbing, HVAC, and fire safety. Basically, everything hidden behind the walls gets checked to make sure it’s safe and done right.

Stage 3: The Big Finale

The last stop is the final inspection. This happens once the project is complete. The inspector makes sure your new addition, garage, or suite is fully up to code and ready for you to enjoy. It’s like the final seal of approval before you move in or show it off.

Why It Matters

Toronto takes building safety seriously, and these inspections are in place to protect homeowners. The good news? When you work with Apex Build Solutions, you don’t have to stress about what happens at each stage. We handle the permits, schedule the inspections, and make sure everything passes the first time.

So whether you’re dreaming of a bigger home, a brand-new garage, or a stylish garden suite in Toronto, consider us your guide through the process — from digging to the big finale.